Hi,

Thanks for the recommendation Tiago. I went further this time and successfully went though the ./configure and make stage. However, when I run make install something goes wrong. Below I post the relevant part of the procedure according to my judgement. First I go into sage's virtual environment by typing

$ sage -sh

Then I run:

(sage-sh) juan@mostro:graph-tool-2.2.29.1$ ./configure CPPFLAGS="-I/home/juan/usr/local/include/boost" LDFLAGS="-L/home/juan/usr/local/lib" SPARSEHASH_CFLAGS="-I/usr/include/google/sparsehash"

some bla bla bla

(sage-sh) juan@mostro:graph-tool-2.2.29.1$ make

after many hours...it seems to success. Finally I try to install

(sage-sh) juan@mostro:graph-tool-2.2.29.1$ sudo make install

Making install in src
make[1]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src'
Making install in graph
make[2]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph'
Making install in centrality
make[3]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/centrality'
make[4]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/centrality'
make[4]: Nothing to be done for `install-exec-am'.
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/centrality'
 /bin/bash ../../../libtool   --mode=install /usr/bin/install -c   libgraph_tool_centrality.la '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/centrality'
libtool: install: /usr/bin/install -c .libs/libgraph_tool_centrality.so /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/centrality/libgraph_tool_centrality.so
libtool: install: /usr/bin/install -c .libs/libgraph_tool_centrality.lai /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/centrality/libgraph_tool_centrality.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/centrality
----------------------------------------------------------------------
Libraries have been installed in:
   /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/centrality

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include'
 /usr/bin/install -c -m 644 graph_closeness.hh graph_eigentrust.hh graph_eigenvector.hh graph_pagerank.hh graph_hits.hh graph_katz.hh graph_trust_transitivity.hh minmax.hh '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include'
make[4]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/centrality'
make[3]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/centrality'
Making install in clustering
make[3]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/clustering'
make[4]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/clustering'
make[4]: Nothing to be done for `install-exec-am'.
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/clustering'
 /bin/bash ../../../libtool   --mode=install /usr/bin/install -c   libgraph_tool_clustering.la '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/clustering'
libtool: install: /usr/bin/install -c .libs/libgraph_tool_clustering.so /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/clustering/libgraph_tool_clustering.so
libtool: install: /usr/bin/install -c .libs/libgraph_tool_clustering.lai /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/clustering/libgraph_tool_clustering.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/clustering
----------------------------------------------------------------------
Libraries have been installed in:
   /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/clustering

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include'
 /usr/bin/install -c -m 644 graph_clustering.hh graph_extended_clustering.hh graph_motifs.hh '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include'
make[4]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/clustering'
make[3]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/clustering'
Making install in community
make[3]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/community'
make[4]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/community'
make[4]: Nothing to be done for `install-exec-am'.
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/community'
 /bin/bash ../../../libtool   --mode=install /usr/bin/install -c   libgraph_tool_community.la '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/community'
libtool: install: /usr/bin/install -c .libs/libgraph_tool_community.so /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/community/libgraph_tool_community.so
libtool: install: /usr/bin/install -c .libs/libgraph_tool_community.lai /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/community/libgraph_tool_community.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/community
----------------------------------------------------------------------
Libraries have been installed in:
   /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/community

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include'
 /usr/bin/install -c -m 644 graph_blockmodel.hh graph_community.hh graph_community_network.hh '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include'
make[4]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/community'
make[3]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/community'
Making install in correlations
make[3]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/correlations'
make[4]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/correlations'
make[4]: Nothing to be done for `install-exec-am'.
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/correlations'
 /bin/bash ../../../libtool   --mode=install /usr/bin/install -c   libgraph_tool_correlations.la '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/correlations'
libtool: install: /usr/bin/install -c .libs/libgraph_tool_correlations.so /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/correlations/libgraph_tool_correlations.so
libtool: install: /usr/bin/install -c .libs/libgraph_tool_correlations.lai /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/correlations/libgraph_tool_correlations.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/correlations
----------------------------------------------------------------------
Libraries have been installed in:
   /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/correlations

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include'
 /usr/bin/install -c -m 644 graph_assortativity.hh graph_correlations.hh graph_corr_hist.hh graph_avg_correlations.hh '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include'
make[4]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/correlations'
make[3]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/correlations'
Making install in draw
make[3]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/draw'
make[4]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/draw'
make[4]: Nothing to be done for `install-exec-am'.
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/draw'
 /bin/bash ../../../libtool   --mode=install /usr/bin/install -c   libgraph_tool_draw.la '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/draw'
libtool: install: /usr/bin/install -c .libs/libgraph_tool_draw.so /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/draw/libgraph_tool_draw.so
libtool: install: /usr/bin/install -c .libs/libgraph_tool_draw.lai /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/draw/libgraph_tool_draw.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/draw
----------------------------------------------------------------------
Libraries have been installed in:
   /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/draw

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/draw'
make[3]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/draw'
Making install in flow
make[3]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/flow'
make[4]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/flow'
make[4]: Nothing to be done for `install-exec-am'.
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/flow'
 /bin/bash ../../../libtool   --mode=install /usr/bin/install -c   libgraph_tool_flow.la '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/flow'
libtool: install: /usr/bin/install -c .libs/libgraph_tool_flow.so /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/flow/libgraph_tool_flow.so
libtool: install: /usr/bin/install -c .libs/libgraph_tool_flow.lai /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/flow/libgraph_tool_flow.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/flow
----------------------------------------------------------------------
Libraries have been installed in:
   /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/flow

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include'
 /usr/bin/install -c -m 644 graph_augment.hh '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include'
make[4]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/flow'
make[3]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/flow'
Making install in generation
make[3]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/generation'
make[4]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/generation'
make[4]: Nothing to be done for `install-exec-am'.
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/generation'
 /bin/bash ../../../libtool   --mode=install /usr/bin/install -c   libgraph_tool_generation.la '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/generation'
libtool: install: /usr/bin/install -c .libs/libgraph_tool_generation.so /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/generation/libgraph_tool_generation.so
libtool: install: /usr/bin/install -c .libs/libgraph_tool_generation.lai /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/generation/libgraph_tool_generation.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/generation
----------------------------------------------------------------------
Libraries have been installed in:
   /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/generation

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include'
 /usr/bin/install -c -m 644 graph_generation.hh graph_rewiring.hh graph_predecessor.hh graph_union.hh graph_triangulation.hh graph_lattice.hh graph_geometric.hh graph_complete.hh graph_price.hh dynamic_sampler.hh sampler.hh '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include'
make[4]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/generation'
make[3]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/generation'
Making install in layout
make[3]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/layout'
make[4]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/layout'
make[4]: Nothing to be done for `install-exec-am'.
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/draw'
 /bin/bash ../../../libtool   --mode=install /usr/bin/install -c   libgraph_tool_layout.la '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/draw'
libtool: install: /usr/bin/install -c .libs/libgraph_tool_layout.so /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/draw/libgraph_tool_layout.so
libtool: install: /usr/bin/install -c .libs/libgraph_tool_layout.lai /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/draw/libgraph_tool_layout.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/draw
----------------------------------------------------------------------
Libraries have been installed in:
   /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/draw

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include'
 /usr/bin/install -c -m 644 graph_arf.hh graph_sfdp.hh '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include'
make[4]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/layout'
make[3]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/layout'
Making install in search
make[3]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/search'
make[4]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/search'
make[4]: Nothing to be done for `install-exec-am'.
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/search'
 /bin/bash ../../../libtool   --mode=install /usr/bin/install -c   libgraph_tool_search.la '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/search'
libtool: install: /usr/bin/install -c .libs/libgraph_tool_search.so /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/search/libgraph_tool_search.so
libtool: install: /usr/bin/install -c .libs/libgraph_tool_search.lai /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/search/libgraph_tool_search.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/search
----------------------------------------------------------------------
Libraries have been installed in:
   /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/search

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/search'
make[3]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/search'
Making install in spectral
make[3]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/spectral'
make[4]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/spectral'
make[4]: Nothing to be done for `install-exec-am'.
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/spectral'
 /bin/bash ../../../libtool   --mode=install /usr/bin/install -c   libgraph_tool_spectral.la '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/spectral'
libtool: install: /usr/bin/install -c .libs/libgraph_tool_spectral.so /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/spectral/libgraph_tool_spectral.so
libtool: install: /usr/bin/install -c .libs/libgraph_tool_spectral.lai /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/spectral/libgraph_tool_spectral.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/spectral
----------------------------------------------------------------------
Libraries have been installed in:
   /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/spectral

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include'
 /usr/bin/install -c -m 644 graph_adjacency.hh graph_incidence.hh graph_laplacian.hh graph_transition.hh '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include'
make[4]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/spectral'
make[3]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/spectral'
Making install in stats
make[3]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/stats'
make[4]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/stats'
make[4]: Nothing to be done for `install-exec-am'.
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/stats'
 /bin/bash ../../../libtool   --mode=install /usr/bin/install -c   libgraph_tool_stats.la '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/stats'
libtool: install: /usr/bin/install -c .libs/libgraph_tool_stats.so /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/stats/libgraph_tool_stats.so
libtool: install: /usr/bin/install -c .libs/libgraph_tool_stats.lai /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/stats/libgraph_tool_stats.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/stats
----------------------------------------------------------------------
Libraries have been installed in:
   /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/stats

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include'
 /usr/bin/install -c -m 644 graph_parallel.hh graph_histograms.hh graph_average.hh graph_distance_sampled.hh graph_distance.hh '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include'
make[4]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/stats'
make[3]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/stats'
Making install in topology
make[3]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/topology'
make[4]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/topology'
make[4]: Nothing to be done for `install-exec-am'.
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/topology'
 /bin/bash ../../../libtool   --mode=install /usr/bin/install -c   libgraph_tool_topology.la '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/topology'
libtool: install: /usr/bin/install -c .libs/libgraph_tool_topology.so /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/topology/libgraph_tool_topology.so
libtool: install: /usr/bin/install -c .libs/libgraph_tool_topology.lai /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/topology/libgraph_tool_topology.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/topology
----------------------------------------------------------------------
Libraries have been installed in:
   /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/topology

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include'
 /usr/bin/install -c -m 644 graph_components.hh graph_kcore.hh graph_similarity.hh graph_subgraph_isomorphism.hh '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include'
make[4]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/topology'
make[3]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/topology'
Making install in util
make[3]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/util'
make[4]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/util'
make[4]: Nothing to be done for `install-exec-am'.
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/util'
 /bin/bash ../../../libtool   --mode=install /usr/bin/install -c   libgraph_tool_util.la '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/util'
libtool: install: /usr/bin/install -c .libs/libgraph_tool_util.so /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/util/libgraph_tool_util.so
libtool: install: /usr/bin/install -c .libs/libgraph_tool_util.lai /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/util/libgraph_tool_util.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/util
----------------------------------------------------------------------
Libraries have been installed in:
   /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/util

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include'
 /usr/bin/install -c -m 644 graph_search.hh '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include'
make[4]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/util'
make[3]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph/util'
make[3]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph'
make[4]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph'
make[4]: Nothing to be done for `install-exec-am'.
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool'
 /bin/bash ../../libtool   --mode=install /usr/bin/install -c   libgraph_tool_core.la '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool'
libtool: install: /usr/bin/install -c .libs/libgraph_tool_core.so /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/libgraph_tool_core.so
libtool: install: /usr/bin/install -c .libs/libgraph_tool_core.lai /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/libgraph_tool_core.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool
----------------------------------------------------------------------
Libraries have been installed in:
   /home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include'
 /usr/bin/install -c -m 644 ../../config.h fast_vector_property_map.hh gml.hh graph.hh graph_adjacency.hh graph_adaptor.hh graph_exceptions.hh graph_filtering.hh graph_properties.hh graph_properties_group.hh graph_python_interface.hh graph_selectors.hh graph_util.hh histogram.hh mpl_nested_loop.hh numpy_bind.hh numpy_bind_old.hh random.hh str_repr.hh shared_map.hh transform_iterator.hh '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include'
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include/boost-workaround/boost/graph/'
 /usr/bin/install -c -m 644 ../boost-workaround/boost/graph/betweenness_centrality.hpp ../boost-workaround/boost/graph/detail/read_graphviz_new.hpp ../boost-workaround/boost/graph/graphml.hpp ../boost-workaround/boost/graph/graphviz.hpp ../boost-workaround/boost/graph/isomorphism.hpp ../boost-workaround/boost/graph/kamada_kawai_spring_layout.hpp ../boost-workaround/boost/graph/metric_tsp_approx.hpp ../boost-workaround/boost/graph/named_function_params-alt.hpp ../boost-workaround/boost/graph/overloading.hpp ../boost-workaround/boost/graph/push_relabel_max_flow.hpp ../boost-workaround/boost/graph/copy_alt.hpp ../boost-workaround/boost/graph/reverse_graph_alt.hpp ../boost-workaround/boost/graph/stoer_wagner_min_cut.hpp '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool/include/boost-workaround/boost/graph/'
make[4]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph'
make[3]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph'
make[2]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph'
Making install in graph_tool
make[2]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph_tool'
make[3]: Entering directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph_tool'
make[3]: Nothing to be done for `install-exec-am'.
 /bin/mkdir -p '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool'
 /usr/bin/install -c -m 644 __init__.py dl_import.py decorators.py io.py all.py '/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site-packages/graph_tool'
make[3]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph_tool'
make[2]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src/graph_tool'
make[1]: Leaving directory `/home/juan/Downloads/graph-tool-2.2.29.1/src'
Traceback (most recent call last):
  File "/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site.py", line 548, in <module>
    main()
  File "/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site.py", line 530, in main
    known_paths = addusersitepackages(known_paths)
  File "/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site.py", line 266, in addusersitepackages
    user_site = getusersitepackages()
  File "/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site.py", line 241, in getusersitepackages
    user_base = getuserbase() # this will also set USER_BASE
  File "/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/site.py", line 231, in getuserbase
    USER_BASE = get_config_var('userbase')
  File "/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/sysconfig.py", line 516, in get_config_var
    return get_config_vars().get(name)
  File "/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/sysconfig.py", line 449, in get_config_vars
    import re
  File "/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/re.py", line 105, in <module>
    import sre_compile
  File "/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/sre_compile.py", line 14, in <module>
    import sre_parse
  File "/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/sre_parse.py", line 17, in <module>
    from sre_constants import *
  File "/home/juan/Downloads/sage-6.1.1/local/lib/python2.7/sre_constants.py", line 18, in <module>
    from _sre import MAXREPEAT
ImportError: cannot import name MAXREPEAT
make[3]: *** [install-graph_toolPYTHON] Error 1
make[2]: *** [install-am] Error 2
make[1]: *** [install-recursive] Error 1
make: *** [install-recursive] Error 1

It seems that sage's Python is trying to import recursively some module. But I am not sure how to fix this. Any ideas?

Best Regards,
Juan



On Tue, Feb 11, 2014 at 11:45 AM, Tiago Peixoto [via Main discussion list for the graph-tool project] <[hidden email]> wrote:
On 02/09/2014 09:01 AM, Juan I. Perotti wrote:

> Hello,
>
> I am trying to install graph-tool in sagemath ( check
> http://www.sagemath.org/ <http://www.sagemath.org/>   ), under Ubuntu 12.04.
>
> Basically, sagemath is python with many good modules helpful for
> mathematics, and why not physics.
>
> sagemath has its own built version of python, which is standard by using a
> virtual environment. The idea is, I guess, not to mess up with your system
> python.
>
> By typing in a terminal
>
> $ sage -sh
>
>
> you enter into sagemath virtual environment, which looks like:
>
> (sage -sh) $
>
>
> therefore, if you try to run a python console by typing
>
> (sage -sh)$ python
>
>
> then, it will run the python built in sage's virtual environment.
>
> From the virtual environment I have installed CGAL, and then, I tried to
> configure graph-tool typing:
>
> (sage -sh) graph-tool-2.2.29$ ./configure
> checking for a BSD-compatible install... /usr/bin/install -c
> checking whether build environment is sane... yes
> checking for a thread-safe mkdir -p... /bin/mkdir -p
> checking for gawk... no
> checking for mawk... mawk
> checking whether make sets $(MAKE)... yes
> checking whether make supports nested variables... yes
> checking whether make supports nested variables... (cached) yes
> checking for style of include used by make... GNU
> checking for gcc... gcc
> checking whether the C compiler works... yes
> checking for C compiler default output file name... a.out
> checking for suffix of executables...
> checking whether we are cross compiling... no
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for gcc option to accept ISO C89... none needed
> checking whether gcc understands -c and -o together... yes
> checking dependency style of gcc... gcc3
> checking for library containing strerror... none required
> checking how to run the C preprocessor... cpp
> checking for grep that handles long lines and -e... /bin/grep
> checking for egrep... /bin/grep -E
> checking for ANSI C header files... yes
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... yes
> checking for unistd.h... yes
> checking minix/config.h usability... no
> checking minix/config.h presence... no
> checking for minix/config.h... no
> checking whether it is safe to define __EXTENSIONS__... yes
> checking whether we are using the GNU C++ compiler... yes
> checking whether g++ accepts -g... yes
> checking dependency style of g++... gcc3
> checking for gcc option to accept ISO C99... unsupported
> checking for gcc option to accept ISO C89... (cached) none needed
> checking for gcc option to accept ISO Standard C... (cached) none needed
> checking how to run the C++ preprocessor... g++ -E
> checking for ANSI C header files... (cached) yes
> checking build system type... x86_64-unknown-linux-gnu
> checking host system type... x86_64-unknown-linux-gnu
> checking how to print strings... printf
> checking for a sed that does not truncate output... /bin/sed
> checking for fgrep... /bin/grep -F
> checking for ld used by gcc... ld
> checking if the linker (ld) is GNU ld... yes
> checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
> checking the name lister (/usr/bin/nm -B) interface... BSD nm
> checking whether ln -s works... yes
> checking the maximum length of command line arguments... 1572864
> checking whether the shell understands some XSI constructs... yes
> checking whether the shell understands "+="... yes
> checking how to convert x86_64-unknown-linux-gnu file names to
> x86_64-unknown-linux-gnu format... func_convert_file_noop
> checking how to convert x86_64-unknown-linux-gnu file names to toolchain
> format... func_convert_file_noop
> checking for ld option to reload object files... -r
> checking for objdump... objdump
> checking how to recognize dependent libraries... pass_all
> checking for dlltool... no
> checking how to associate runtime and link libraries... printf %s\n
> checking for archiver @FILE support... @
> checking for strip... strip
> checking for ranlib... ranlib
> checking command to parse /usr/bin/nm -B output from gcc object... ok
> checking for sysroot... no
> checking for mt... mt
> checking if mt is a manifest tool... no
> checking for dlfcn.h... yes
> checking for objdir... .libs
> checking if gcc supports -fno-rtti -fno-exceptions... no
> checking for gcc option to produce PIC... -fPIC -DPIC
> checking if gcc PIC flag -fPIC -DPIC works... yes
> checking if gcc static flag -static works... yes
> checking if gcc supports -c -o file.o... yes
> checking if gcc supports -c -o file.o... (cached) yes
> checking whether the gcc linker (ld -m elf_x86_64) supports shared
> libraries... yes
> checking whether -lc should be explicitly linked in... no
> checking dynamic linker characteristics... GNU/Linux ld.so
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... no
> checking how to run the C++ preprocessor... g++ -E
> checking for ld used by g++... ld -m elf_x86_64
> checking if the linker (ld -m elf_x86_64) is GNU ld... yes
> checking whether the g++ linker (ld -m elf_x86_64) supports shared
> libraries... yes
> checking for g++ option to produce PIC... -fPIC -DPIC
> checking if g++ PIC flag -fPIC -DPIC works... yes
> checking if g++ static flag -static works... yes
> checking if g++ supports -c -o file.o... yes
> checking if g++ supports -c -o file.o... (cached) yes
> checking whether the g++ linker (ld -m elf_x86_64) supports shared
> libraries... yes
> checking dynamic linker characteristics... (cached) GNU/Linux ld.so
> checking how to hardcode library paths into programs... immediate
> checking target system type... x86_64-unknown-linux-gnu
> checking whether to enable debug info...... no
> checking whether C++ compiler supports -std=gnu++11... yes
> checking whether to enable function inlining...... yes
> checking whether to enable optimizations...... yes
> checking whether to enable symbol visibility manipulation...... yes
> checking whether to enable graph filtering...... yes
> checking whether to enable parallel algorithms with openmp...... no
> checking whether to enable cairo drawing...... yes
> checking whether to enable sparsehash...... yes
> checking for main in -lm... yes
> checking for main in -lbz2... yes
> checking for main in -lexpat... yes
> ================
> Detecting python
> ================
> checking for a Python interpreter with version >= 2.6... python
> checking for python...
> /home/juan/Downloads/software/sage-5.12-linux-64bit-ubuntu_12.04.3_lts-x86_64-Linux/local/bin/python
> checking for python version... 2.7
> checking for python platform... linux2
> checking for python script directory...
> ${prefix}/lib/python2.7/site-packages
> checking for python extension module directory...
> ${exec_prefix}/lib/python2.7/site-packages
> checking for python2.7... (cached)
> /home/juan/Downloads/software/sage-5.12-linux-64bit-ubuntu_12.04.3_lts-x86_64-Linux/local/bin/python
> checking for a version of Python >= '2.1.0'... yes
> checking for a version of Python == '2.7.5'... yes
> checking for the distutils Python package... yes
> checking for Python include path...
> -I/home/juan/Downloads/software/sage-5.12-linux-64bit-ubuntu_12.04.3_lts-x86_64-Linux/local/include/python2.7
> checking for Python library path...
> -L/home/buildbot/build/sage/snapperkob/snapperkob_binary/build/sage-5.12/local/lib
> -lpython2.7
> checking for Python site-packages path...
> /home/juan/Downloads/software/sage-5.12-linux-64bit-ubuntu_12.04.3_lts-x86_64-Linux/local/lib/python2.7/site-packages
> checking python extra libraries...  -lpthread -ldl  -lutil
> checking python extra linking flags... -Xlinker -export-dynamic
> checking consistency of all components of python development environment...
> yes
> graph-tool will be installed at:
> /home/juan/Downloads/software/sage-5.12-linux-64bit-ubuntu_12.04.3_lts-x86_64-Linux/local/lib/python2.7/site-packages
> ===========================
> Using python version: 2.7.5
> ===========================
> checking for boostlib >= 1.38.0... yes
> checking whether the Boost::Python library is available... yes
> checking for exit in -lboost_python... yes
> checking whether the Boost::Iostreams library is available... yes
> checking for exit in -lboost_iostreams... yes
> checking whether the Boost::Regex library is available... yes
> checking for exit in -lboost_regex... yes
> checking whether the Boost::Graph library is available... yes
> checking for exit in -lboost_graph... yes
> checking for main in -lCGAL... yes
> checking whether to cgal debbuging with valgrind...... no
> checking python module: numpy... yes
> checking for
> /home/juan/Downloads/software/sage-5.12-linux-64bit-ubuntu_12.04.3_lts-x86_64-Linux/local/lib/python2.7/site-packages/numpy/core/include/numpy/arrayobject.h...
> yes
> checking python module: scipy... yes
> checking
> /home/juan/Downloads/software/sage-5.12-linux-64bit-ubuntu_12.04.3_lts-x86_64-Linux/local/lib/python2.7/site-packages/scipy/weave/scxx/object.h
> usability... yes
> checking
> /home/juan/Downloads/software/sage-5.12-linux-64bit-ubuntu_12.04.3_lts-x86_64-Linux/local/lib/python2.7/site-packages/scipy/weave/scxx/object.h
> presence... yes
> checking for
> /home/juan/Downloads/software/sage-5.12-linux-64bit-ubuntu_12.04.3_lts-x86_64-Linux/local/lib/python2.7/site-packages/scipy/weave/scxx/object.h...
> yes
> checking expat.h usability... yes
> checking expat.h presence... yes
> checking for expat.h... yes
> checking CGAL/version.h usability... no
> checking CGAL/version.h presence... no
> checking for CGAL/version.h... no
> configure: error: CGAL headers not found
>
>
> As you can see, the config is using sage's version of python. However, it
> does not find CGAL's headers. Do you know why?
Where did you install CGAL? If you installed it in a non-standard
directory, this needs to be passed to the configure script via the
CPPFLAGS and LDFLAGS variables.

Check the output in the config.log file, which includes the reason why
CGAL was not found. You can post the contents of this file to the list,
if you are unable to find the problem.

Best,
Tiago

--
Tiago de Paula Peixoto <[hidden email]>


_______________________________________________
graph-tool mailing list
[hidden email]
http://lists.skewed.de/mailman/listinfo/graph-tool

signature.asc (919 bytes) Download Attachment
--
Tiago de Paula Peixoto <[hidden email]>



To unsubscribe from Installing graph-tool in sagemath, click here.
NAML



--
Dr. Juan I. Perotti

Postal Address:
Aalto University
Department of Biomedical Engineering and Computational Science (BECS)
P.O. Box 12200
FI-00076 AALTO, FINLAND
Visiting Address:
F-building, room F344, Rakentajanaukio 2, Otaniemi campus, Espoo
Tel. + 358 50 5927 858 / + 358 46 6306 650
Email: juanpool (at) gmail (dot) com
Email: juan.perotti (at) aalto (dot) fi
Home page: www.perottijuanignacio.com.ar


View this message in context: Re: Installing graph-tool in sagemath
Sent from the Main discussion list for the graph-tool project mailing list archive at Nabble.com.